We save heat, or How to switch windows to winter mode

Tags:Balcony and loggia, Living room and bedroom, Children's room, With your own hands

The indoor air temperature largely depends on the tightness of the window system. Timely regulation is allowed to create the most comfortable conditions in each room. As part of today's review, we will look at how to switch windows to winter mode so that you can do it yourself.

Windows can work in different positions

The content of the article

1 Standard, summer and winter mode of plastic windows: what is it
2 Why do you need to adjust the modes of plastic windows
3 Advantages and disadvantages of switching windows to winter mode
4 Which fittings have the function of switching to summer or winter mode
5 What are the eccentrics (pins) for transferring windows to different modes
6 How to find out from your windows if they have a winter mode?
7 Preparation of windows for transfer to winter mode
8 When and how to switch windows to winter or summer mode
9 How to properly adjust windows
10 Photo and video instructions
- 10.1 How to transfer plastic windows to winter mode?
- 10.2 Video of transferring plastic windows to winter mode

Standard, summer and winter mode of plastic windows: what is it

The mode of modern plastic windows determines the degree of pressing the sash to the frame. May be:

standard, at which the sash has an average clamping position that is optimal for sealing material... The window system is able to work effectively in winter and summer. The eccentric is in a central position;
winter. The closest fit of the sash to the frame is ensured. The winter position of plastic windows allows you to more effectively retain heat inside the house;
summer. The leaf is fixed less tightly. The air can circulate freely, providing a micro-ventilation effect. As a result, in the hot season, comfortable conditions are created in the apartment.

The tightness of the sash to the frame may vary

Why do you need to adjust the modes of plastic windows

Alternating the summer and winter modes of plastic windows, you can extend the service life of the structure. In winter, the material shrinks, and as the air warms up, it expands. Adjusting the window system changes the degree of sash pressure. As a result, the wear rate of the seal and fasteners is reduced.

Change the mode of the plastic window if:

blowing from the side of the window. An incorrectly chosen position will lead to the fact that in winter cold air will flow from the side of the window system;
the sash does not open or close well. An incorrectly selected position can contribute to its jamming in the ventilation mode;
the sash sagged. Critical hinge wear may be the cause. By replacing the fittings or by switching the structure to winter mode, you can get rid of the problem.

Advice! Ask the master how to switch the double-glazed windows to winter mode immediately after the installation of the system.

Homes are warmer with properly adjusted window systems

Advantages and disadvantages of switching windows to winter mode

Timely change of the window construction mode has a beneficial effect on the microclimate inside the house. When in the winter position, the system will prevent the penetration of cold outside. Summer position will provide active air circulation.

Correct adjustment will make your stay comfortable

It should be remembered that the constant change in the order of the window system has certain disadvantages. The adjusting screws increase the sealing of the window system. However, a constant change in the position of the fastener can cause a loss of the basic characteristics of the sealing element. Strong compression, exposure to low temperatures and high humidity can lead to the fact that after 2-3 seasons the seal will become worse performing its main purpose. In some cases, it may even need to be replaced.

Attention! By refusing to change the order of operation of the window system, you can increase the service life of the seal at least twice.

With constant regulation, a change of insulation may be required

Which fittings have the function of switching to summer or winter mode

Before figuring out how to put plastic windows on winter mode, it is worth finding out if all structures have this function. The answer is no. It all depends on which class the used fittings belong to. Allocate accessories:

budgetary. Such fittings have limited functionality, as they are intended for cheap plastic products. With its help, the sash can be opened / closed. Individual models allow you to choose ventilation. Budget fittings are most often resorted to in large-scale construction, when it is necessary to reduce the cost of erecting a typical new building;
standard... The price matches the quality. Products have a wider functionality compared to the budget option. Most models allow you to set the winter mode on plastic windows. Standard fittings are widely used in most window systems installed in buildings for various purposes;
specialized. Such products are intended for windows that are installed in rooms operated in special conditions. They have special capabilities. They can be anti-burglary. With their help, you can change the operating conditions of the window system.

The order of work of a plastic window structure depends on the fittings

What are the eccentrics (pins) for transferring windows to different modes

An eccentric or trunnion is one of the hardware elements that is used to transfer the window system from one operating mode to another. The trunnions can be of various shapes. As a rule, round or oval with a special hole for the tool.

The shape of the trunnion depends on the manufacturer

How to find out from your windows if they have a winter mode?

Having purchased housing in a typical house, not every user knows whether there is a winter-summer mode on the plastic windows in his apartment. You can check this by visually inspecting the fittings that come with the window system. Particularly noteworthy is the pin located on the side of the sash.If the trunnion has key holes, or it has an oval shape, then such a system allows operation in various positions.

The presence of an adjustment hole indicates the possibility of changing the degree of clamping of the sash

Preparation of windows for transfer to winter mode

Before proceeding to adjusting the window system, a number of preparatory measures should be performed. This will require:

mop. It is advisable that she has a telescopic handle, as this will simplify the process of cleaning the window block;
household chemicals for washing windows and cleaning fittings;
paper towels. You can use napkins;
Silicone Grease;
brush or brush with stiff bristles.

Advice! Timely maintenance of double-glazed windows will greatly simplify the process of switching from one mode of operation to another.

Preparatory work is carried out in the following sequence:

glass is washed;
the frame is cleared of accumulated dirt. Special attention is paid to joints and connections;
the fittings are cleaned. To do this, you should use a hard brush;
all elements of the window system are carefully wiped off;
fittings are lubricated with silicone grease;
the pin is given the required spatial position;
grease is reapplied.

During the preparation phase, the window should be thoroughly washed

When and how to switch windows to winter or summer mode

When to transfer windows from one mode to another, everyone decides individually. If from under the closed sash "pulls cold", it is worth go to "winter"... You should not rush so as not to worsen the condition of the rubber seal ahead of time. It is also important not to overdo it, since tightly tightening the eccentric sometimes leads to breakage of the window system... As soon as it gets warmer outside, you should immediately switch from "winter" to "summer". We will consider in more detail below how to transfer euro windows to winter mode.

If it blows from the window - it's time to adjust the system

How to properly adjust windows

Before setting the mode, adjust the window system to avoid damage to the sealing element when sagging or skewing the sash. Armed with a pencil with a soft rod, you should circle the closed sash around the perimeter. This should be done carefully, without much effort.

If the window is well adjusted, you will not be able to remove the sheet

Having opened the sash, measure the distance between the frame opening and the drawn line. The values obtained should be in the range of 6 - 8 mm. Ideally - equal around the entire perimeter.

The sash should be located in the center of the opening

If the values do not match in height, you should, after removing the decorative plastic insert from the hinges, tighten the screws using the hexagon. If the distance is less from below, then slightly unscrew the upper screw, adjust the position of the sash and screw the fasteners back. This action is repeated with the second loop. If the distance is less at the top, the same actions are performed with the lower screw. Adjustment is performed until the desired result is achieved. As a result, all screws should assume approximately the same position.

Attention! A properly adjusted structure should open without the characteristic rubbing sound.

If a horizontal sash displacement is required, the adjusting screw is tightened in one of the hinges. The offset can be up to 3 mm. If you want to move away from the hinge, rotate counterclockwise. Otherwise, clockwise.

Adjusting the fittings will ensure the desired sash position

Related article:

How to regulate plastic windows yourself? In a separate publication you can find detailed instructions on adjusting windows in different situations.

Photo and video instructions

A sufficiently detailed verbal description does not always allow you to figure out how to switch windows to winter mode.Pictures with a detailed description or a master class recorded on video allows you to understand this much faster and better. We suggest choosing the most convenient way of perceiving information, so that it is easier to adjust the window structure at home.

A master class with a photo will allow you to understand better than a detailed description

How to transfer plastic windows to winter mode?

For those who do not know how to switch windows to winter mode, instructions with a detailed description will help to complete the necessary steps accurately enough. You should prepare the necessary tools and follow the recommendations of a specialist.

To begin with, we will consider in detail how to transfer windows to winter mode with a hexagon. You can follow the instructions below:

Photo	Description of work
	We open the sash.
	Preparing a 4 mm square wrench.
	We adjust the position of the first eccentric.
	We adjust the position of the second eccentric. If there are more, their position should also be adjusted.
	The required position is determined by the notch. In winter mode, it should be located closer to the rubber seal. In the photo there is a winter mode on plastic windows.
	Turning the eccentric 180 degrees will allow you to switch the windows to "summer".
	Check if all the eccentrics are in the correct position. Their number can be determined by the strike plates.

Attention! The eccentrics on the sashes can be located on the hinge side and on the handle side!

If you want to see how to transfer plastic windows to winter mode, we suggest watching a video of the master class, which allows you to consider the process in detail.

Video of transferring plastic windows to winter mode

Below are useful videos on how to transfer plastic windows to winter mode. The video of the process will allow you to understand the most difficult details. It is worthwhile to carefully look at the proposed master class several times before starting to do the work with your own hands:

Another video on how to switch windows to winter mode will allow you to understand the essence of the process:

Now you know how to switch windows to winter mode, and if necessary, you can do it yourself. Share in the comments your results, and how the microclimate in your home has changed after the adjustment. Write if you still need any help, and we will provide you with the opportunity to sort out incomprehensible issues.

RATE THIS ARTICLE